Edge Profiles

Simple Roundover
Available on top and/or bottom from 1/8" to 1-1/2"

Chamfer
A bevel cut available at 45-degrees or 15-degrees

Simple Cove
Available on top and/or bottom from 1/2" to 1-1/2"

Beaded Roundover
Available on top and/or bottom from 1/8" to 1 1/2"

Classical Cove
Available on top and/or bottom from 1/2" to 1 1/2"

Standard Ogee
Available on top only; depth of profile is 3/4"

Ogee with Notch
Available on top only; depth of profile is 3/4"

Ogee Fillet
Available on top only; depth of profile is 11/16"

Classical Bead and Cove
Available on top only in both small size (1 1/16") or large size (1 7/8")

French Baroque
Available on top only; depth of profile is 7/8"

Standard Double Roman Ogee
Available on top only; depth of profile is 5/8"

Standard Roman Ogee
Available on top only; depth of profile is 1"

Conventional Double Roman Ogee
Available on top only and requires a minimum thickness of 1 3/4"; depth of profile is 1 5/16"

Medium Roman Ogee
Available on top only and requires a minimum thickness of 2 1/4"; depth of profile 1 7/8"

Medium Double Roman Ogee
Available on top only and requires a minimum thickness of 2 1/2"; depth of profile is 2 1/8"

Super Roman Ogee
Available on top only and requires a minimum thickness of 3"; depth of profile is 2 5/8" (also available with notch)

Super Double Roman Ogee
Available on top only and requires a minimum thickness of 3"; depth of profile is 2 5/8"

Super Double Roman Ogee with Notch
Available on top only and requires a minimum thickness of 3 1/4"; depth of profile is 2 13/16"