1/4″ Roundover Edge Profile

Quarter Inch Roundover Countertop EdgesRoundovers are a very simple edge profile. A smaller roundover will maximize the visual thickness of the piece. When specifying roundovers, you must consider the top horizontal edge, the bottom horizontal edge, and the vertical corners of the piece to ensure the desired visual appearance. There are various sizes of Roundovers. The minimum required thickness of the countertop is 1-1/2″ for counters with 1/8″ roundover.

Click the next button to see additional countertop edge profiles.


Quick Facts 1/4" Roundover

  • Popular for modern and traditional kitchen styles
  • Will visually increase the thick appearance of the countertop
  • The smallest roundover offered by Grothouse
  • Requires a 1-1/2” thick countertop
  • The price for this profile is Low

Side Profile View

Roundover Edge Profile

Edge Grain White Hard Maple

Edge Grain Maple with Quarter Inch Roundover Countertop Edges

Top Horizontal Edge:1/4" Roundover

Bottom Horizontal Edge:1/4" Roundover

Vertical Corners:1" radius

Flat Grain Sapele Mahogany

Flat Grain Sapele Mahogany with Quarter Inch Roundover Countertop Edges

Top Horizontal Edge:1/4" Roundover

Bottom Horizontal Edge:1/4" Roundover

Vertical Corners:1/2" Roundover

End Grain Random Mix Maple

End Grain Maple with Quarter Inch Roundover Countertop Edges

Top Horizontal Edge:1/4" Roundover

Bottom Horizontal Edge:1/4" Roundover

Vertical Corners:1/4" Roundover

How To Specify Your Edge Profile

Designing Custom Edge Profiles

This photo shows how to indicate the top horizontal edge, bottom horizontal edge, and vertical corners of your countertop.

Maple Wood Countertop with Quarter Roundover Edge Butcher Block Countertop with Quarter Roundover Edge Walnut Wood Counter with Quarter Roundover Edge
Wood Countertops Edge Treatment with 1/2 Round Vertical Corner1/2" Round Vertical Corner Wood Countertops Edge Treatment with Square Vertical CornerSquare Vertical Corner