3/4″ Roundover Edge Profile

Three Quarter Inch Roundover Countertop EdgesRoundovers are a very simple edge profile. A smaller roundover will maximize the visual thickness of the piece. When specifying roundovers, you must consider the top horizontal edge, the bottom horizontal edge, and the vertical corners of the piece to ensure the desired visual appearance. There are various sizes of Roundovers. The minimum required thickness of the countertop is 1-1/2″ for counters with 1/8″ roundover.

Click the next button to see additional countertop edge profiles.


Quick Facts 3/4" Roundover

  • Popular for modern and traditional kitchen styles
  • Will visually increase the thick appearance of the countertop
  • The smallest roundover offered by Grothouse
  • Requires a 1-1/2” thick countertop
  • The price for this profile is Low

Side Profile View

Roundover Edge Profile

Edge Grain Maple

Edge Grain Maple with Three Quarter Inch Roundover Countertop Edges

Top Horizontal Edge:3/4" Roundover

Bottom Horizontal Edge:1/8" Roundover

Vertical Corners:1/8" Roundover

Flat Grain Sapele Mahogany

Flat Grain Sapele Mahogany with Three Quarter Inch Roundover Countertop Edges

Top Horizontal Edge:3/4" Roundover

Bottom Horizontal Edge:1/8" Roundover

Vertical Corners:Round

End Grain

Top Horizontal Edge: 

Bottom Horizontal Edge:

Vertical Corners:

How To Specify Your Edge Profile

Designing Custom Edge Profiles

This photo shows how to indicate the top horizontal edge, bottom horizontal edge, and vertical corners of your countertop.

Walnut Wood Counter with Three Quarter Roundover EdgeMahogany Butcher Block with Three Quarter Roundover
Custom Wood Counters Edge with 1/2 inch Round Vertical Corner1/2" Round Vertical CornerCustom Wood Counters Edge with Square Vertical CornerSquare Vertical Corner