45 Degree Chamfer Countertop Edge Profile

45 Degree Chamfer Countertop EdgesA 45 Degree Chamfer edge profile is a basic beveled edge treatment that is easy to keep clean. They are popular for modern and contemporary kitchens. Chamfers can be applied to the top horizontal edge or bottom horizontal edge. The depth (or width) of the chamfer must be specified when ordering. The chamfer is also offered with a 45 degree and 15 Degree Angle. Requires a minimum thickness of 1-1/2″.

Click Next to view more countertop edge profiles.


Quick Facts 45 Degree Chamfer

  • Popular for Modern style kitchens and bath
  • Can be placed on the top or bottom of countertop edge
  • Visually the reduces the thickness of the counter surface
  • Minimum countertop thickness is 1-1/2”
  • The price for this profile is Low

Side Profile View

Chamfer

Edge Grain Walnut w/ Sapwood

45 Degree Chamfer Countertop Edges on Edge Grain Walnut

Top Horizontal Edge:1/2" Chamfer 45 Degree

Bottom Horizontal Edge:1/8" Roundover

Vertical Corners:1/8" Roundover

Flat Grain Iroko

45 Degree Chamfer Countertop Edge on Flat Grain Iroko

Top Horizontal Edge:1/2" Chamfer 45 Degree

Bottom Horizontal Edge:1/8" Roundover

Vertical Corners:Square

End Grain Random Mix Walnut w/ Sapwood

End Grain Random Mix Walnut with 45 Degree Chamfer Countertop Edges

Top Horizontal Edge:3/4" Chamfer 45 Degree

Bottom Horizontal Edge:Square

Vertical Corners:Square

How To Specify Your Edge Profile

Designing Custom Edge Profiles

This photo shows how to indicate the top horizontal edge, bottom horizontal edge, and vertical corners of your countertop.

Wood counters with 1/2 inch Round Vertical Corner Edge1/2" Round Vertical Corner Wood Counters with Square Vertical Corner EdgeSquare Vertical Corner